I made TWO of these pet beds for our cat in under two hours. So I thought I would show you how to make one - or a few! - as well in the video below. I have also included the supplies and instructions below the video for those who would like to print them out.
Supplies Needed for 1 Pet Bed
2 yards of fleece (I used 2 coordinating designs)
16 oz bag of cluster fluff fiber
sewing machine thread
hand quilting thread
Instructions to Make 1 Pet Bed
Cut (2) 24.5 inches x 24.5 inches from the fleece.
Sew right sides together*. Leave 10-inch opening on one side
to turn right side out and to stuff the bed.
Turn right side out. Be sure corners are pushed out.
Use about ½ a bag of cluster fiber to LOOSELY stuff the pet
bed. Stuff the corners first then evenly disburse throughout the rest of the
bed.
After stuffing, whipstitch the opening closed.
The pet bed is now finished.
*Both sides of fleece are usually the same. However, if
there is a noticeably
thicker side or a brighter side of the print, that would be considered the right side.
thicker side or a brighter side of the print, that would be considered the right side.
Have a nice day!
www.SewPractical.com
www.MarvsWindowsTips.com
